ASHP Air Source Heat Pump Central Heating System / Residential Air
Source Heat Pump
Air Source Heat Pump Central Heating System Features
1. Central heating station, the control of every room could be
seperated.
2.It is 40% enegy-saving than electric conventional Air conditioner
unit.
3.Control complete operation, advanced intelligent control system,
with compressor protection, high voltage protection, low voltage
protection, water shortage protection, leakage protection, lack of
protection, overload protection, antifreeze protection, excessive
exhaust temperature protection. The comprehensive protection
function principle is convenient and simple.
4. Many sets could be connected parallel according to the service
area.
Air Source Heat Pump Central Heating System Application
Widely used, the products have different specifications series,
which can meet the heating of factories, hotels, schools,
hospitals, beauty salons, bathing centers, villas, homes, etc.
.
Air Source Heat Pump Central Heating System code name.pdf
| Model | SDNA-075Y | SDNA-090YB |
| Compressor capacity | 25HP | 30HP |
| Function | Heat | Heat |
| Electricity | 380V 3N-50Hz | 380V 3N-50Hz |
| Working conditions | ℃ | -25~+45 | -25~+45 |
| Data | Heata | Nominal capacity | KW | 44.5 | 56.2 |
| Input power | KW | 18.3 | 23.4 |
| COP | / | 2.4 | 2.4 |
| Heating IPLV(H) | 2.7 | 2.7 |
| A7W35c | KW/COP | 75.0/4.2 | 90.0/4.2 |
| A2W35 | KW/COP | 62.5/3.20 | 79.0/3.20 |
| A-7W35 | KW/COP | 52.5/3.0 | 63.2/3.0 |
| A-15W55 | KW/COP | 45.5 /1.97 | 56.2/1.97 |
| A-20W45 | KW/COP | 37.4/2.04 | 47.2/2.04 |
| Max. running currency | A | 56 | 70 |
| Compressor quantity | set | 2 | 4 |
| Refrigerant/charging quantity kg | / | R22/10*2 | R22/5*4 |
| Air blow type | / | Top | Top |
| Water pipe diameter | mm | 50 | 50 |
| Rating flow | m³/h | 12.6 | 12.6 |
| Water side pressure loss | kPa | ≤45 | ≤45 |
Is an ASHPs suitable for me?
- Do you have somewhere to put it? central heating station need a
place where a unit can be fitted to the top of building or placed
on the ground. It will need plenty of space around it to get a good
flow of air.
- Is the building well insulated? Since air source heat pumps work
best when producing heat at a lower temperature than traditional
boilers, it's essential that your home is well insulated and
draught-proofed for the heating system to be most efficient.
- What fuel will you be replacing? The system will pay for itself
much more quickly if it's replacing an electricity or coal heating
system.
- What type of heating system will you use? Air source heat pumps can
perform better with underfloor heating systems or warm air heating
.
- Is the system intended for a new development? Combining the
installation with other building work can reduce the cost of
installing the system
